MAINTENANCE
Page 1B-12 90-857046R1 NOVEMBER 2001
Changing Engine Oil
Oil Changing Procedure
Pump Method
1. Place the outboard in an vertical upright position.
2. Remove dipstick and slide adaptor tube/pump down dipstick tube. Pump out the engine
oil into an appropriate container.
a
90265A5
a-Crankcase Oil Pump
Drain Plug Method
1. Tilt the outboard up to the trailer position.
2. Turn the steering on the outboard so that the drain hole is facing downward. Remove
drain plug and drain engine oil into an appropriate container. Lubricate the seal on the
drain plug with oil and reinstall.
a
a-Drain Hole
To Next Page
Loading...
