BIGFOOT GEAR HOUSING
90-857046R1 NOVEMBER 2001 Page 6B-33
Bearing Carrier Reassembly
1. Lubricate O.D. of bearing and bearing carrier bore with 2-4-C Marine Lubricant with
Teflon.
2. Protect lip on forward side of bearing carrier, using bearing installation tool (91-13945).
3. Press propeller shaft needle bearing (number side toward mandrel 91-15755) into carri-
er, until bearing bottoms out.
21042
b
c
95
2-4-C Marine Lubricant with Teflon
95
91-13945
91-15755
a
a- Bearing Installation Tool (91-13945)
b- Mandrel (91-15755)
c- Suitable Driver Rod
To Next Page
Loading...
