Mercury 40 FourStroke - Page 305

LUBRICATION
90-857046R1 NOVEMBER 2001 Page 4C-5
Oil Pump Disassembly
1. If screws cannot be loosened with a screwdriver, heat them with a non-flame type heat
source (heat lamp). This will loosen the Loctite sealant on the screw threads. Remove
screws.
a
a-Screw (2)
2. Disassemble oil pump.
a
b
c
d
e
a-Cover Seal
b-Outer Rotor
c-Inner Rotor
d-Shaft
e-Cross Pin