Mercury 40 FourStroke - Page 307

LUBRICATION
90-857046R1 NOVEMBER 2001 Page 4C-7
Oil Pump Reassembly
1. Reassemble the oil pump assembly.
2. Lubricate the outer and inner rotors thoroughly with engine oil.
a
b
c
d
e
a-Cover Seal
b-Outer Rotor
c-Inner Rotor
d-Shaft
e-Cross Pin
3. Fasten cover with two screws. Apply Loctite 222 to threads. Tighten screws to the speci-
fied torque.
a
Loctite “222”
51
51
a-Screw (2) M6 X 16
Oil Pump Cover Screw Torque
70 lb-in. (8 Nm)