POWER TRIM
90-857046R1 NOVEMBER 2001 Page 5B-21
Manual Tilt
To manually tilt the outboard engine, the owner will need to back out the manual release
valve (p) 3-4 turns. With the valve backed out, the internal passages inside the manifold are
connected together. These passages connect both the cylinder down and up cavities to-
gether, along with the reservoir, allowing the engine to be raised or lowered. Piston rod (a)
movement will continue until the manual release valve (p) is closed, locking the fluid inside
of the cylinder and manifold.
To Next Page
Loading...
Need help?
General
