NON-BIGFOOT GEAR HOUSING
Page 6A-44 90-857046R1 NOVEMBER 2001
5. Lubricate I.D. of impeller housing with 2-4-C Marine Lubricant with Teflon.
6. Rotate drive shaft clockwise while pushing impeller housing cover down over impeller.
7. Apply Loctite 271 to bottom threads of screws. Install screws and tighten to specified
torque.
52830
7
b
a
7 Loctite “271”
95
2-4-C Marine Lubricant with Teflon
a-Cover
b-Screw (4)
Bearing Carrier Screw Torque
60 lb-in. (7.0 Nm)
To Next Page
Loading...
