NON-BIGFOOT GEAR HOUSING
Page 6A-48 90-857046R1 NOVEMBER 2001
9. Install locknut and washer. Torque nut to specified torque.
52833
a
a-Locknut and Washer
Nut Torque
40 lb-ft (54 Nm)
10. Check shift operation.
a. In NEUTRAL, propeller shaft should turn freely in either direction.
b. In FORWARD, propeller shaft SHOULD NOT TURN COUNTERCLOCKWISE.
c. In REVERSE, propeller shaft SHOULD NOT TURN IN EITHER DIRECTION.
IMPORTANT: If shift operation is not as described, remove the gear housing and cor-
rect the shift operation.
To Next Page
Loading...
