BIGFOOT GEAR HOUSING
90-857046R1 NOVEMBER 2001 Page 6B-61
2. Tilt engine to full up position and engage tilt lock lever.
3. Shift gear housing into neutral position. Propeller shaft will rotate freely in either direc-
tion.
4. Install water tube seal. Apply 2-4-C Marine Lubricant with Teflon to I.D. of seal.
5. Apply a bead of RTV Sealer as shown.
NOTE: For ease of gear housing installation, install water tube seal (labyrinth end) onto
water tube in drive shaft housing. Tapered end of water tube seal goes onto water pump.
53938
95
2-4-C Marine Lubricant with Teflon
78
95
a
b
G. E. RTV Sealant
78
a- Water Tube Seal
b- RTV Sealer
To Next Page
Loading...
