Overview
5-2
5.1 Global Configuration Commands
Table 5.1 summarizes the Global Config commands.
Table 5.1 Global Configuration Command Summary
Command Description Ref.
aaa Authentication, Authorization and Accounting. page 5-4
access-list Adds an access list entry. page 5-5
autoinstall Autoinstalls a configuration command. page 5-11
banner Defines a login banner. page 5-12
boot Reboots the switch. page 5-13
bridge Bridges group commands. page 5-14
clrscr Clears the display screen. page 2-3
country-code Configures the country of operation. This erases all existing radio
configuration.
page 5-15
crypto Encryption related commands. page 5-17
do Runs commands from EXEC mode. page 5-21
end Ends the current mode and change to the EXEC mode. page 5-22
errdisable Enables the timeour mechanism for the port. page 5-23
exit Ends the current mode and moves down to the previous mode. page 2-10
format Formats file system. page 5-24
ftp Configures FTP server. page 5-25
help Description of the interactive help system. page 2-11
hostname Sets the system's network name. page 5-26
interface Select an interface to configure. page 5-27
ip Internet Protocol (IP). page 5-28
license License management command. page 5-33
line Configures a terminal line. page 5-34
local Configures the username and password for local user authentication for
VPN.
page 5-35
logging Modifies message logging facilities. page 5-36
mac Configures MAC ACLs. page 5-38
management Sets properties of the management interface. page 5-39
To Next Page
Loading...
Need help?
General
