5-3
no Negates a command or set its defaults . page 2-12
ntp Configures NTP. page 5-40
prompt Sets the system prompt. page 5-43
radius-server Enters radius-server mode. page 5-44
redundancy Configures redundancy group parameters. page 5-45
service Service commands. page 5-47
show Shows running system information. Refer to Global Config show
commands.
page 5-49
snmp-server Modifies SNMP engine parameters. page 5-53
sole Configures the Smart Opportunistic Location Engine (SOLE) configuration. page 5-64
spanning-tree Spanning tree commands. page 5-65
timezone Configures the timezone. page 5-68
username Establishes user name authentication. page 5-69
vpn Configures VPN commands. page 5-70
wireless Configures wireless parameters. page 5-71
wlan-acl Applies an ACL on the WLAN port. page 5-72
Command Description Ref.
To Next Page
Loading...
