Motorola RFS7000 Series User Manual

2-15
limit [buffer
(128|128k|16k|1k|256|2k|
32|32k|4k|512|64|64k|8k]
<0-65535>
Use this parameter to set the diagnostic limit submodes/commands. Configure
the buffer usage warning limit. The warning limit can be set to one of the
following sizes:
• buffer – Buffer usage warning limit.
• 128 – 128 byte buffer limit.
• 128k – 128k byte buffer limit.
• 16k – 16k byte buffer limit.
• 1k – 1k byte buffer limit.
• 256 – 256 byte buffer limit.
• 2k – 2k byte buffer limit.
• 32 – 32 byte buffer limit.
• 32k – 32k byte buffer limit.
• 4k – 4k byte buffer limit.
• 512 – 512 byte buffer limit.
• 64 – 64 byte buffer limit.
• 64k – 64k byte buffer limit.
• 8k – 8 byte buffer limit.
• <0-65535> – Buffer usage warning limit 0-65535.
limit (fan) <1-3> Use this parameter to set the fan speed limit. Configure the fan speed limit for
both fans or just one.
limit (filesys)
[etc2|flash|var]
Use this parameter to set the file system freespace limit. Select the freespace
limit for the following sub context:
•etc2
•flash
•ram
limit (inodes)
[etc2|flash|var]
File system inode limit. Select the freespace limit for the following sub context:
•etc2
•flash
•ram
limit (load) [1|15|5] Configures the aggregate processor load. Select from the following submodes:
• 1 – Aggregate processor load during the previous minute.
• 15 – Aggregate processor load during the previous 15 minute.
• 5 – Aggregate processor load during the previous 5 minute.
limit (maxFDs) <0-32767> Configures the maximum number of file descriptors. Set between 0 to 32767 file
descriptors.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English