Overview
2-16
limit (pkbuffers)
<0-65535>
Configures the packet buffer cache limit. Set between 0 to 65535 as the buffer
cache limit.
limit (procRAM)
< 0.0-100.0>
Defines the RAM space used by a process. Set the percentage of RAM space
used by the processor between 0 to 100.0 percent.
limit (ram) <0.0-25.0> Configures the free space for the RAM. Configure the free space between 0.0
and 100.0 percent.
limit (routecache)
<0-65535>
Defines the IP route cache usage. Define a value between 0 - 65553.
limit (temperature) <1-8> Sets the switch temperature sensor. Set as many as 8 temperature sensors.
period <100-30000> Sets the diagnostic period.
• <100-30000> – Configures the diagnostics period. Set a value between
100-30000 milli seconds. The default value is 1000 milliseconds.
service (encrypt)
encrypt(secret) 2 LINE Encrypts passwords with a secret phrase using SHA256-AES256 encryption.
service (locator)
locator Flash all LEDS to locate the switch visually.
service (save-cli)
save-cli Create a file (clitree.html), which saves and displays the CLI tree for all modes.
service (show)
show {cli|
command-history|
crash-info|
diag|info|memory|
process|
reboot-history|
startup-log|
upgrade-history}
Displays the running system information.
• cli – Shows CLI tree of current mode.
• command-history – Displays a command (except show commands)
history.
• crash-info – Displays information about core, panic and access port dump
files.
• diag – Diagnostics.
• info – Shows a snapshot of available support information.
• memory – Shows memory statistics.
• natstats – Shows ACL rule stats.
• process – Shows processes (sorted by memory usage).
• reboot-history – Shows reboot history.
• rulestats – Shows ACL rule stats.
• startup-log – Shows the startup log.
• upgrade-history – Shows the upgrade history.
To Next Page
Loading...
Need help?
General
