19-23
19.1.11 no
RADIUS Configuration Commands
Use this command to negate a command or set its defaults.
Syntax
no(authentication|ca|crl-check|group|ldap-server|nas|proxy|rad-
user|server|service)
Parameters
Example
RFS7000(config-radsrv)#no authentication data-source
RFS7000(config-radsrv)#
RFS7000(config-radsrv)#no ca trust-point
RFS7000(config-radsrv)#
authentication RADIUS authentication.
ca Configures ca certificate parameters.
crl-check Certificate Revocation List (CRL) check.
group Local RADIUS Server group configuration.
ldap-server LDAP server parameters.
nas RADIUS client.
proxy RADIUS proxy server.
rad-user RADIUS user configuration.
server Configures server certificate parameters.
service Service commands.