Motorola RFS7000 Series User Manual

Overview
20-10
20.1.7 ap-udp-port
Wireless Configuration Commands
Use this command to configure the UDP port for layer 3 AP adoption. Configure the DHCP server supporting
the AP’s with the same parameter.
Syntax
ap-udp-port <1-65535>
Parameters
Example
RFS7000(config-wireless)#ap-udp-port 10
RFS7000(config-wireless)#
<1-65535> The port number used for layer 3 AP adoption.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English