Overview
20-38
reset
Resets a radio (this only resets the specified radio, not the complete access
port).
reset-ap
Resets the parent access port (this resets all radios on that access port).
rss (enable)
Enables Remote Site Survivability (RSS).
rts-threshold<0-2347>
RTS threshold in bytes.
run-acs
Runs Auto Channel Selection on a radio. The radio must already have been
configured for ACS.
self-heal-offset <0-30>
Configures the self healing offset, measured in dBm, for regulatory.
Note This offset is based off the regulatory maximum power for
the specified channel (the command "show wireless regulatory"
shows the max power allowed).
short-preamble
Enables short preamble support.
Note Disables support for long preamble. Mobile Units that only
support long preamble will not be able to associate.
To Next Page
Loading...
Need help?
General
