2-43
Usage Guidelines
1. It has been noted the interface and VLAN status is displayed as UP despite of a disconnection. In such
a case, shutdown the VLAN. Follow these steps:
a. Check the status of the interface and VLAN:
RFS7000(config)#show ip interface brief
Interface IP-Address Status Protocol
vlan1 157.235.208.69(DHCP) up up
vlan3 unassigned up up
RFS7000(config)#
dhcp-vendor-options DHCP Option 43 parameters received from DHCP server.
domain-name Default domain for DNS.
http Hyper Text Transfer Protocol.
• secure-server – Secure HTTP server.
• server – HTTP server.
interface IP interface status and configuration.
• IFNAME – Interface name.
• brief – Brief summary of IP status and configuration.
• ge – GigabitEthernet interface.
• me1 – FastEthernet interface.
• sa – StaticAggregate interface.
• vlan – VLAN interface.
name-server DNS nameservers.
ip nat
[interfaces|translations]
ip nat (translation)
[inside|outside|verbose]
[destination|source]
Network Address Translation (NAT).
• interfaces – NAT Configuration on Interfaces.
• translations – NAT translations.
• inside|outside|verbose (destination|source).
route IP routing table.
• A.B.C.D – Displays the network in the IP routing table.
• A.B.C.D/M – IP prefix <network>/<length>, e.g., 35.0.0.0/8.
• detail – IP routing table in detail.
routing IP routing status.
ssh Secured Shell (SSH) server.
telnet Telnet server.
To Next Page
Loading...
Need help?
General
