NEC SL1000 - Program 15: Extension, Basic Setup; Basic Extension Data Setup

Program 15 : Extension, Basic Setup
15-01 : Basic Extension Data Setup
Level
SA
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Input Data
Extension Number Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Item
No.
Item Input Data Default
Related Pro-
gram
Note
01 Extension Name
Define the extension/virtual
extension name.
Up to 12 Characters Ext. 200 ~ 327 = No
setting (SL1000)
Ext. 200 ~ 319 = No
setting (SL1100)
02 Outgoing Trunk Line Pref-
erence
Use this option to set the
extension outgoing Trunk
Line Preference. If enabled,
the extension user receives
trunk dial tone when they lift
the handset. The user hears
trunk dial tone only if allowed
by Trunk Access Map pro-
gramming (Programs 14-07
and 15-06). Refer to the Line
Preference feature for more
details.
0=Off
1=On
0 14-06
21-02
03 SMDR Printout
Use this option to include or
exclude the extension in the
SMDR report.
0 = Do not print on
SMDR report
1 = Include on SMDR
report
1
04 ISDN Caller ID
If both Program 15-01-04
and 10-03-05 are enabled,
the system includes Caller
ID in the Setup message as
Presentation Allowed. If
these options are disabled, it
is Presentation Restricted.
0 = Disable
1 = Enable
1 10-03-05
20-08-13
05 Restriction for Outgoing
Disable on Incoming Line
Enable or disable supervised
dial detection for an exten-
sion.
0 = Supervise dial de-
tection
1 = Not supervise dial
detection
0 21-01-15
21-01-16
21-01-17
80-03-01
07 Do-Not-Call 0=Off
1=On
0 21-01-19
08 Call Attendant Busy
Message
0 ~ 100
(0=Nosetting)
0 11-11-59
40-10-08
09 Call Attendant Answer
Message
0 ~ 100
(0=Nosetting)
0 11-11-60
40-10-09
Conditions
None
ISSUE 1.0SL1000/SL1100
Program
15
Program 15 : Extension, Basic Setup2-116