NEC SL1000 - Preselected Data Setup

Program 90 : Maintenance Program
90-33 : Preselected Data Setup
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use 90-33 : Preselected Data Setup to setup the system to preselected setting.
Input Data
Item No. Item Name Input Data
01 China Dial 1 + press Hold (Press Hold only to cancel.)
02 Chile Dial 1 + press Hold (Press Hold only to cancel.)
04 Taiwan Dial 1 + press Hold (Press Hold only to cancel.)
05 Korea Dial 1 + press Hold (Press Hold only to cancel.)
06 Hong Kong Dial 1 + press Hold (Press Hold only to cancel.)
07 Brazil Dial 1 + press Hold (Press Hold only to cancel.)
08 Malaysia Dial 1 + press Hold (Press Hold only to cancel.)
09 Thailand Dial 1 + press Hold (Press Hold only to cancel.)
10 India Dial 1 + press Hold (Press Hold only to cancel.)
Default
China
Program No. Name Default Note
10-02-01 Country Code 86
(For China)
14-02-09 Busy Tone Detection 1
(All trunks : On)
14-02-18 Busy Tone Detection on talking 1
(All trunks : On)
15-03-15 Disconnect without dial after hooking
hold
1
(All stations = Disconnect)
20-01-09 Camp-on cancel time 30
20-02-12 Mode setting for incoming call from
extension
1
(Signaling call)
20-17-01 Operator’s Extension number 200 (Operator 1 = 200)
20-31-02 Callback / Trunk Queuing Cancel Time 30
20-31-07 Ring No Answer Alarm Time 30
20-31-08 DIL/Incoming Ring Group No Answer
Time
30
20-31-19 DISA Conversation Warning Tone
Timer
180
21-03-01 Trunk Group Routing for Trunks 1
(All trunks : All modes : Group1)
ISSUE 1.0 SL1000/SL1100
Program
90
Programming Manual 2-531