Program 22 : Incoming Call Setup
22-07 : DIL Assignment
Level
IN
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling
Group for each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or
Ring Group programming. If an extension has a line key, the DIL rings the line key. Use Program 22-02
to designate a trunk as a DIL. You can make eight DIL assignments, one for each Night Service mode.
Input Data
Trunk Port Number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item No. Day/Night Mode Number of Transferring Destination Default
01 1 ~ 8 Assign extension or department group number for DIL trunk
Extension Number (maximum four digits (SL1000) maximum eight
digits (SL1100))
No setting
Conditions
• Program 22-02 must be set to four for the trunk.
Feature Cross Reference
• Direct Inward Line (DIL)
ISSUE 1.0 SL1000/SL1100
Program
22
Programming Manual 2-251
To Next Page
Loading...
