Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
Level
IN
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. You can customize additional Service Codes in Pro-
grams 11-10 ~ 11-15.
The following chart shows:
• The number of each code (01 ~ 11).
• The function of the Service Code.
• The default entry. For example, dialing 1 (Item 03) when calling an extension switches the call from
either a voice or signal call (depending on how it is currently defined).
• Programs that may be affected by changing these codes.
Input Data
Item No.
Item Default
Related Pro-
gram
Note
01 Step Call 4
02 Barge-In No setting
03 Switching of Voice/Signal Call 1
04 Intercom Off-Hook Signaling
*
05 Camp-On #
06 DND/Call Forward Override Bypass No setting
07 Message Waiting 0
08 Voice Over 6 (SL1100)
09 Access to Voice Mail 5
10 (Department) STG All Ring Mode No setting 16-01-05
11 Station Park Hold No setting
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
11
Programming Manual 2-77
To Next Page
Loading...
