NEC SL1000 - Dial Block Setup

Program 21 : Outgoing Call Setup
21-09 : Dial Block Setup
Level
IN
Description
Use Program 21-09 : Dial Block Setup to define the Dial Blocking Toll Restriction Class and Dial
Block Password to be used by the Supervisor extension.
Input Data
Item No. Item Input Data Default
01 Toll Restriction Class With Dial Block
Assign a Toll Restriction Class of Service
when the Dial Block feature is used.
1~15 1
02 Supervisor Password
Assign a 4-digit password to be used by the
supervisor to enable or disable Dial Block for
other extensions.
0~9,
*
,#
(4-digit fixed)
No setting
Conditions
• This function works by password and Class of Service control (the supervisor is not an assigned
extension). If Dial Block is available for all Classes of Service, everyone may become a supervisor
if they know the Dial Block password.
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
21
Programming Manual 2-229