NEC SL1000 - Voice Announcement Service Option

Program 40 : Voice Recording System
40-10 : Voice Announcement Service Option
Level
IN
Description
In Program 40-10 : Voice Announcement Service Option define the system options for the Voice
Announcement feature.
Input Data
Item
No.
Item Input Data Default
Related
Program
01 VRS Fixed Message
Enable (1) or disable (0) the system abil-
ity to play the fixed VRS messages (such
as You have a message).
0 = Not Used
1=Used
1
02 General Message Number
This item assigns the VRS message
number to use for the General Message.
0 ~ 100
(0 = No General Message
Service)
0
03 VRS No Answer Destination
This item assigns the transferred Ring
Group when the VRS is unanswered after
Call Forwarding with Personal Greeting
Message.
0~25
(Incoming Ring Group Num-
ber)
0
(No setting)
04 VRS No Answer Time
If an extension has Personal Greeting
enabled and all VRS ports are busy, a
DIL or DISA call to the extension waits
this time for a VRS port to become free.
0 ~ 64800 seconds 0
05 Park and Page Repeat Timer (VRS Msg
Resend)
If a Park and Page is not picked up dur-
ing this time, the Paging announcement
repeats.
0 ~ 64800 seconds 0
06 Set VRS Message for Private Call Re-
fuse (VRS Msg Private Call)
This item assigns the VRS Message
number to be used as Private Call Re-
fuse.
When Fixed message is set, VRS mes-
sage guidance is: “Your call cannot go
through.”
0 ~ 101
(0 = No message)
(101 = Fixed message)
0 14-01-27
07 Set VRS Message for Caller ID Refuse
(VRS Msg CID)
This item assigns the VRS Message
number to be used as Caller ID Refuse.
When Fixed Message is set, VRS mes-
sage guidance is: “Your call cannot go
through.”
0 ~ 101
(0 = No message)
(101 = Fixed message)
0 14-01-27
08 Call Attendant Busy Message 0 ~ 100
(0 = No message)
0 15-01-08
09 Call Attendant No Answer Message 0 ~ 100
(0 = No message)
0 15-01-09
Conditions
None
ISSUE 1.0 SL1000/SL1100
Program
40
Programming Manual 2-353