NEC SL1000 - Program 16: Department Group Setup; Department Group Basic Data Setup

Program 16 : Department Group Setup
16-01 : Department Group Basic Data Setup
Level
IN
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each depart-
ment group. There are 32 available Department Groups.
Input Data
Department Group Number 1 ~ 32
Item No.
Item Input Data Default
Related Pro-
gram
01 Department Name Maximum 12 characters No setting 11-07
02 Department Calling Cycle
Use this option to set the call routing
for Department Calling. Routing can
be either circular (cycles to all phones
in group) or priority (cycles to highest
priority extensions first).
0 = Normal Routing (Priority)
1 = Easy - UCD Routing (Circular)
0 16-02
03 Department Routing when Busy
(Auto Step Call)
Set this option to set how the system
routes an Intercom call to a busy De-
partment Group member. Intercom
callers to the extension can either
hear busy or route to the first avail-
able department number. This only
occurs for calls to the extension di-
rectly, not the department number
assigned in Program 11-07.
0 = Normal (Intercom caller to
busy department member hears
busy)
1 = Circular (Intercom callers to
busy department member routes
to idle member)
0 16-02
04 Hunting Mode
Use this option to set the action taken
when a call reaches the last extension
in the Department Group (0 = hunting
stopped, 1 = hunting repeats with cir-
cular routing through the Department
Group).
0 = Last extension is called and
hunting is stopped
1 = Circular
0
05 Extension Group All Ring Mode
Operation
Determine whether calls ringing a De-
partment Group should ring all exten-
sions in the group simultaneously
automatically or manually when using
the service code defined in Program
11-12-09.
When set to (1) Automatic,
only ICM Calls and DID
Calls will ring all the stations
in the Department Group.
0 = Manual (Service Code)
1 = Automatic
0 11-16-10
06 STG Withdraw Mode 0 = Disable (Camp On)
1 = Enable (Overflow Mode)
0
07 Call Recall Restriction for STG
Determine whether or not an unan-
swered call transferred to a Depart-
ment Group should recall the
extension from which it was trans-
ferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
ISSUE 1.0SL1000/SL1100
Program
16
Program 16 : Department Group Setup2-150