NEC SL1000 - Service Code Setup (for Setup;Entry Operation)

Program 11 : System Numbering
11-11 : Service Code Setup (for Setup/Entry Operation)
Level
IN
Description
Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service
Codes which are used for registration and setup. You can customize additional Service Codes in Pro-
grams 11-10, and 11-12 ~ 11-16.
The following chart shows:
• The number of each code (01 ~ 69 (SL1000) 01 ~ 72 (SL1100)).
• The function of the Service Code.
• What type of telephones can use the Service Code.
• The default entry. For example, users to turn on or turn off Background Music by dialing the number
set at item 18.
Input Data
Item
No.
Item Terminals Default
Related
Program
Note
01 Call Forward - All MLT, SLT 848
02 Call Forward - Busy MLT, SLT #1
03 Call Forward - No Answer MLT, SLT 845
04 Call Forward - Busy/No
Answer
MLT, SLT 844
05 Call Forward - Both Ring MLT, SLT 842
07 Call Forwarding - Follow-Me MLT, SLT 846
08 Do Not Disturb MLT, SLT 847
09 Answer Message Waiting MLT, SLT
*
0 11-10-16
10 Cancel All Messages
Waiting
MLT, SLT 873
11 Cancel Message Waiting MLT, SLT 871
12 Alarm Clock MLT, SLT 827 20-01-06
13 Display Language Selection
for Multiline Terminal
MLT 778 15-02
14 Text Message Setting MLT 836
15 Enable Handsfree Incoming
Intercom Calls
MLT 821 20-09-05
20-02-12
16 Force Ringing of Incoming
Intercom Calls
MLT 823 20-09-05
20-02-12
17 Programmable Function Key
Programming (3-Digit Ser-
vice Codes)
MLT 851 15-07
11-11-38
18 BGM On/Off MLT 825
19 Key Touch Tone On/Off MLT 824
20 Change Incoming CO and
ICM Ring Tones
MLT 820 15-02
21 Check Incoming Ring Tones MLT 811
ISSUE 1.0SL1000/SL1100
Program
11
Program 11 : System Numbering2-68