Program 31 : Paging Setup
31-01 : System Options for Internal/External Paging
Level
IN
Description
Use Program 31-01 : System Options for Internal/External Paging to define the system options for
Internal/External Paging.
The system shows the name you program on the telephone display. Use the following chart when en-
tering and editing text. When using the keypad digits, press the key once for the first character, twice
for the second character, etc. For example, to enter C, press 2 three times. Press 2 six times to display
the lower case letter.
Key for Entering Names
When entering names in the procedures below, refer to this chart. Names can have up to 12 digits.
Use this keypad digit ... When you want to ...
1
Enter characters : 1@[¥]^_`{|}
ÁÀÂÃÅÆÇÉÊìó0
2 Enter characters : A-C, a-c, 2.
3 Enter characters : D-F, d-f, 3.
4 Enter characters : G-I, g-i, 4.
5 Enter characters : J-L, j-l, 5.
6 Enter characters : M-O, m-o, 6.
7 Enter characters : P-S, p-s, 7.
8 Enter characters : T-V, t-v, 8.
9 Enter characters : W-Z, w-z, 9.
0 Enter characters : 0!“#$%&’()ôõúåäæöüαεθВ
*
Enter characters :
*
+,-./:;<=>?πΣσΩ∞¢£
# # = Accepts an entry (only required if two letters on the same key are needed - ex : TOM).
Pressing # again = Space. (In system programming mode, use the right arrow soft key instead
to accept and/or add a space.)
Clear/Back Clear the character entry one character at a time.
Flash Clear all the entries from the point of the flashing cursor and to the right.
Input Data
Item No. Item Name Input Data Default
Related Program
01 All Call Paging Zone Name
Assign a name to each All Call Internal
Paging zone. The name shows on the
display of the telephone making the an-
nouncement.
Up to 12 Characters GRP ALL
(SL1000)
Group all
(SL1100)
11-12-19
31-02-02
02 Page Announcement Duration
This timer sets the maximum length of
Page announcements. (Affects External
Paging only)
0 ~ 64800 seconds 1200 seconds
ISSUE 1.0SL1000/SL1100
Program
31
Program 31 : Paging Setup2-316
To Next Page
Loading...
