NEC SL1000 - External Speaker Control

Program 31 : Paging Setup
31-06 : External Speaker Control
Level
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using
an amplifier.
Input Data
External Speaker Number 1 ~ 3
Item No. Item Input Data Default
01 Broadcast Splash Tone Before
Paging (Paging Start Tone)
Use this option to enable or disable
splash tone before Paging over an
external zone. If enabled, the system
broadcasts a splash tone before the
External Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
02 Broadcast Splash Tone After Pag-
ing (Paging End Time)
Use this option to enable or disable
splash tone after Paging over an ex-
ternal zone. If enabled, the system
broadcasts a splash tone at the end
of an External Paging announcement.
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
2
03 Speech Path
Determine if the external speaker will
be used for talkback (As this option is
not available with the CPU external
page zone, speaker 9 should be left
at 1).
0 = Both Way (Duplex)
1 = One Way (Simplex)
1
04 CODEC Transmit Gain Setup 1 ~ 63 (- 15.5 ~ + 15.5 dB) 32 (0 dB)
05 CODEC Receive Gain Setup 1 ~ 63 (- 15.5 ~ + 15.5 dB) 32 (0 dB)
Conditions
None
Feature Cross Reference
• Paging, External
ISSUE 1.0 SL1000/SL1100
Program
31
Programming Manual 2-323