Program 22 : Incoming Call Setup
22-14 : VRS Delayed Message for IRG
Level
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each in-
coming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
Input Data
Incoming Ring Group Number 1 ~ 25
Item No. Item Input Data Default
01 1
st
Delayed Message Start Time
Time before the VRS Delay Message is
played for IRG.
0 ~ 64800 seconds 0
02 1
st
Delayed Message Number
VRS message that is used for the 1st De-
layed Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
03 1
st
Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st
Delay Message is not played.
0 ~ 255 (time) 0
04 2
nd
Delayed Message Number
VRS message that is used for the 2nd De-
layed Message.
0 ~ 101
0 = No Message
101 = Fixed Message
0
05 2
nd
Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd
Delay Message is not played.
0 ~ 255 (time) 0
06 Tone Kind at Message Interval
What is heard between the Delay Mes-
sage.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0
07 Disconnect Time After the End of VRS
Delayed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
0 ~ 64800 seconds
0=NoDisconnect
60
Conditions
None
Feature Cross Reference
None
ISSUE 1.0SL1000/SL1100
Program
22
Program 22 : Incoming Call Setup2-260
To Next Page
Loading...
