Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item
No.
Item Input Data Default
Related
Program
Note
01 Trunk Loop Key Opera-
tion Mode
0 = Keep Lamp
1 = Extinction
0
Mode
0 = Keep Lamp 1 = LED Off
Incoming : 300 IPM Red blink
Talking : Green Lighting
(on Talking TEL)
LED Off
Holding : 60 IPM Green
blink (on holding
TEL)
LED Off
02 Trunk Group Access Key
Operating Mode
Use this option to set the
operating mode of the ex-
tension trunk group keys.
The keys are for incoming
access, outgoing access,
or both.
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0
03 BLF Control
Set the conditions under
which a Hotline, Reverse
Voice Over or DSS Con-
sole key indicates that an
extension is busy. Refer to
the Reverse Voice Over
feature for more informa-
tion.
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
1 (SL1100)
04 Retrieve the Line After
Transfer
Enable (1) or disable (0)
an extension ability to an-
sweracallafterithas
been transferred, but be-
fore it is answered.
0 = Not Holding (No Keep)
1 = Holding (Keep)
0
05 Headset Busy Mode
Set the conditions under
which a headset extension
is busy to incoming call-
ers.
0 = No (Disable)
1 = Yes (Enable)
0 20-09-07
06 Pre-selection Time
When a multiline terminal
user preselects a line key,
the system remembers the
pre-selection for this time.
0 ~ 64800 seconds 5
ISSUE 1.0SL1000/SL1100
Program
20
Program 20 : System Option Setup2-156
To Next Page
Loading...
