NEC SL1000 - System Options for Virtual Extensions

Program 20 : System Option Setup
20-04 : System Options for Virtual Extensions
Level
IN
Description
Use Program 20-04 : System Options for Virtual Extensions to set up various system options for
Virtual Extensions. There are 50 available Virtual Extension ports.
Input Data
Item
No.
Item Input Data Default
Related Pro-
gram
Note
01 Virtual Extension Key Op-
eration Mode
With an entry of “0”, after an-
swering a call on a virtual ex-
tension key, once the call is
picked up, the call comes off
the virtual extension key and
appears on the line or loop
key.
With an entry of “1”, after an-
swering a call on a virtual ex-
tension key, once the call is
picked up, the call will remain
on the virtual extension key.
0 = Release Virtual Extension
Key
1 = Hold Virtual Extension
Key
0 15-18-01
03 Virtual Extension Delay In-
terval
Virtual Extensions set for De-
layed Ringing (see Program
15-11) ring the extension after
this time.
0 ~ 64800 seconds 10
04 Virtual Extension Key Seize
Mode
When set to Enhanced,the
BLF will not show as being
busy when the station is on a
trunk call.
When set to Normal, the BLF
will show as being busy when
on a trunk call.
0 = Normal
1 = Enhanced Option
1
Conditions
None
Feature Cross Reference
• Virtual Extensions
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-161