NEC SL1000 - System Alarm Report

Program 90 : Maintenance Program
90-11 : System Alarm Report
Level
IN
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm report.
Input Data
Item No.
Item Input Data Default
02 Report Method
When alarm reports are e-mailed, set this option to 1.
E-mail address set in 90-11-08.
0 = No Report
1 = E-mail Address
0
06 SMTP Host Name
When alarm reports are e-mailed, set the SMTP
name (ex : smtp.yourisp.com). Contact your ISP (in-
ternet service provider) for the correct entry if
needed.
Up to 255 Characters No setting
07 SMTP Host Port Number
When alarm reports are e-mailed, set the SMTP host
port number. Contact your ISP (internet service pro-
vider) for the correct entry if needed.
0 ~ 65535 25
08 To E-mail Address
When alarm reports are e-mailed, set this e-mail ad-
dress to which the report should be sent.
Up to 255 Characters No setting
09 Reply Address
When alarm reports are e-mailed, set the e-mail ad-
dress where replies should be e-mailed.
Up to 255 Characters No setting
10 From Address
When alarm reports are e-mailed, set this e-mail ad-
dress for the station sending the report.
Up to 255 Characters No setting
11 DNS Primary Address
When alarm reports are e-mailed, set the DNS pri-
mary address.
0.0.0.0 ~ 255.255.255.255 0.0.0.0
12 DNS Secondary Address
When alarm reports are e-mailed, set the DNS sec-
ondary address.
0.0.0.0 ~ 255.255.255.255 0.0.0.0
13 Customer Name
When alarm reports are e-mailed, enter a name to
identify the particular system.
Up to 255 Characters No setting
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
90
Programming Manual 2-517