NEC SL1000 - DID Trunk Group to Translation Table Assignment

Program 22 : Incoming Call Setup
22-13 : DID Trunk Group to Translation Table Assignment
Level
IN
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk
Groups to DID Translation Tables. DID trunks should be in their own group. If you have more than one
type of DID trunk, put each type in a separate Trunk Group. For each Trunk Group, you make a Trans-
lation Table entry for each Night Service mode.
Input Data
Trunk Group Number 1 ~ 25
Item No. Day/Night Mode Conversion Table Area Number Default
01 1~8 0~20
(0=Nosetting)
1
Conditions
None
Feature Cross Reference
• Direct Inward Dialing (DID)
ISSUE 1.0 SL1000/SL1100
Program
22
Programming Manual 2-259