NEC SL1000 - SMDR Output Options

Program 35 : SMDR Account Code Setup
35-02 : SMDR Output Options
Level
IN
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Recording)
output options for each of the eight SMDR ports. Refer to the following chart for a description of each
option, its range and default setting.
Input Data
SMDR Port Number 1 ~ 2
Item No. Item Input Data Default
01 Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
0 = Not Displayed
1 = Displayed
1
02 PBX Calls
When the system is behind a PBX, SMDR can
include all calls (1) or just calls dialed using the
PBX trunk access code (0).
0 = Not Displayed
1 = Displayed
1
03 Trunk Number or Name
Select whether the system should display the
trunk name (0) or the number (1) on SMDR re-
ports.
If this option is set to 1, Program 35-
02-14 must be set to 0.
0=Name
1 = Number
1
04 Summary (Daily)
Set this option to (1) to have the SMDR report
provides a daily summary (at midnight every
night).
0 = Not Displayed
1 = Displayed
1
05 Summary (Weekly)
Set this option to (1) to have the SMDR report
provides a weekly summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
1
06 Summary (Monthly)
Set this option to (1) to have the SMDR report
provides a monthly summary (at midnight on the
last day of the month).
0 = Not Displayed
1 = Displayed
1
07 Toll Charge Cost
Set this option to (1) have the SMDR report in-
clude toll charges.
0 = Not Displayed
1 = Displayed
1
08 Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls do not print.
0 = Not Displayed
1 = Displayed
1
09 Extension Number or Name
Set this option (1) to have the SMDR report in-
clude extension numbers. Set this option (0) to
have the SMDR report include extension names.
0=Name
1 = Number
1
10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
0 = Not Displayed
1 = Displayed
0
11 Walking Toll Restriction Table Number 0 = Not Output
1 = Output
1
ISSUE 1.0SL1000/SL1100
Program
35
Program 35 : SMDR Account Code Setup2-344