NEC SL1000 - Tos Setup

Program 84 : Hardware Setup for VoIPDB
84-10 : ToS Setup
Level
IN
Description
Use Program 84-10 : ToS Setup to set up the Type of Service data.
Input Data
ProtocolType 1~3=Notused
4=H.323
5 = RTP/RTCP
6=SIP
7 = Not used
8 = SIP-MLT
9=SIPTrunk
10 = Not used
Item
No.
Item Input Data Default Description
01 ToS Mode
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
0
When Input Data is set to 1, Item No.
07 is invalid. When Data is set to 2,
Item No. 02 ~ 06 are invalid.
02 Priority, IP Precedence
0~7
0 = Low
7=High
0 1 = Router queuing priority
03 Low Delay
0~1
0 = Normal Delay, Low Delay
0 1 = Optimize for low delay routing
04 Wideband (Throughout)
0~1
0 = Normal Throughput
1 = High Throughput
0
1 = Optimize for high bandwidth rout-
ing
05 High Reliability
0~1
0 = Normal Reliability
1 = Low Reliability
0 1 = Optimize for reliability routing
07
Priority (D.S.C.P. - Differ-
entiated Services Code
Point)
0~63 0
DSCP (Differentiated Services Code
Point)
Conditions
• The system must be reset for these program options to take affect.
Feature Cross Reference
None
ISSUE 1.0SL1000/SL1100
Program
84
Program 84 : Hardware Setup for VoIPDB2-476