NEC SL1000 - In-DHCP Server Setup

Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the CPU.
Input Data
Item No. Item Input Data Default Description
01 DHCP Server Mode 0=Disable
1 = Enable
0 Enable or disable the use of the built-in
DHCP Server. This program cannot be
enabled if PRG10-63-01 is enabled.
02 Lease Time Days 0 ~ 255 0 day Lease Time of the IP address to a cli-
ent.
Pressing the Hold Key incre-
ments to the next setting
data.
Hour0~23 0hour
Minutes0~59 30minutes
05 Last DHCP Data 0=Disable
1 = Enable
1 If 10–13–01 is enabled, this setting
determines if DHCP resource is en-
abled or disabled.
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
10
Programming Manual 2-19