NEC SL1000 - System Options for Transfer

Program 24 : Hold/Transfer Setup
24-02 : System Options for Transfer
Level
IN
Description
Use Program 24-02 : System Options for Transfer to define the system options for the Transfer fea-
ture.
Input Data
Item
No.
Item Input Data Default
Related Pro-
gram
01 Busy Transfer
Use this option to prevent or allow extensions
to Transfer calls to busy extensions. If dis-
abled, calls transferred to busy extensions re-
call immediately.
0 = Disable (No)
1 = Enable (Yes)
0
02 MOH or Ringback on Transferred Calls
Use this option to enable or disable MOH on
Transfer. If enabled (0), a transferred caller
hears MOH while their call rings the destina-
tion extension. If disabled (1), a transferred
caller hears ringback while their call rings the
destination extension.
0 = Hold Tone
1 = Ring Back Tone
0 20-03-02
03 Delayed Call Forwarding Time
If activated at an extension, Delayed Call For-
warding occurs after this time. This also sets
how long a Transferred call waits at an exten-
sion forwarded to Voice Mail before routing to
the called extension mailbox.
0 ~ 64800 seconds 10 seconds 20-31-15
04 Transfer Recall Time
An unanswered transferred call recalls to the
extension that initially transferred it after this
time.
0 ~ 64800 seconds 30 seconds 20-31-16
05 Message Wait Ring Interval Time
For Single Line Telephones (SLTs) without
message waiting lamps, this is the time be-
tween intermittent ringing. If this value is set to
0, the system rings once.
0 ~ 64800 seconds 30 seconds
07 Trunk-to-Trunk Transfer Release Warning
Tone
Time starts when a trunk begins talking with
another trunk (for example : trunk-to-trunk
transfer, outgoing from trunk, Tandem Trunk-
ing). When this time expires, a warning tone is
heard. If Program 24-02-10 is set, the conver-
sation disconnects after time expires. This
time is set again when the external digit timer
expires. One of the trunks used must be an
analog trunk (or leased line).
0 ~ 64800 seconds 1800 seconds 14-01-25
20-28-01
20-28-02
20-28-03
24-02-10
08 Delayed Transfer Time for all Department
Groups
0 ~ 64800 seconds 10 seconds 11-11-28
11-11-29
15-07-59
09 Two B-Channel Transfer Retry Timer 0 ~ 30 seconds 10 seconds 10-03-16
(PRI)
10 Disconnect Trunk-to-Trunk 0 ~ 64800 seconds 0 14-01-25
20-28-01
20-28-02
20-28-03
24-02-07
11 No Answer Step Transfer 0 ~ 64800 seconds 10 seconds 14-01-26
ISSUE 1.0 SL1000/SL1100
Program
24
Programming Manual 2-271