NEC SL1000 - Dial Analysis Table for ARS;LCR

Program 26 : ARS Service & Least Cost
Routing
26-02 : Dial Analysis Table for ARS/LCR
Level
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS/F-Route).
• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Dial Analysis Table Number 1 ~ 400
Item
No.
Item Input Data Default
Related Pro-
gram
01 Dial Dial Digits (maximum 16 digits)
0~9,
*
, #, or for wild character (Press line key 1)
No setting
02 ARS Service Type 0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
0
03 Additional Data/
Service Number
If Service Type 1 (in 26-02) : Select Trunk Group Num-
ber
0 ~ 25 (Trunk Group Number0=NoRoute)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not Used=0~100
(F-Route Table Number).
Refer to
Program 44-05 : ARS/F-Route Table on page
2-368
.
F-Route Time Schedule Used=0~100
(F-Route Selection Number).
Refer to
Program 44-04 : ARS/F-Route Selection for
Time Schedule on page 2-367
.
0 44-04
44-05
04 ARS Class of Service 0~16 0
05 Dial Treatment for
ARS
0~15 0
06 LCR Carrier Table 0~25 0
07 Network Specified
Parameter Table
0 ~ 16 0 26-12
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
ISSUE 1.0SL1000/SL1100
Program
26
Program 26 : ARS Service & Least Cost Routing2-294