NEC SL1000 - Program 84: Hardware Setup for Voipdb; H.323 Trunk Basic Information Setup

Program 84 : Hardware Setup for VoIPDB
84-01 : H.323 Trunk Basic Information Setup
Level
IN
Description
Use Program 84-01 : H.323 Trunk Basic Information Setup to set the basic information of the H.323
Trunk.
Input Data
Item No. Item Input Data Default
02 Number of G.711 audio frames 1~4 3
03 G.711 VAD mode 0=Disable
1 = Enable
0
04 G.711 Type 0 = A-law
1 = μ-law
0
05 Number of G.729 audio frames 1~6 3
06 G.729 VAD mode 0=Disable
1 = Enable
0
07 G.729 Jitter Buffer( min) 0 ~ 300 ms 30
08 G.729 Jitter Buffer (average) 0 ~ 300 ms 60
09 G.729 Jitter Buffer (max) 0 ~ 300 ms 120
11 Number of G.723 audio frames 1~2 1
15 Jitter Buffer Mode 1 = Fixed
3 = Self adjusting
3
16 G.711 Jitter Buffer( min) 0 ~ 255 ms 30
17 G.711 Jitter Buffer (average) 0 ~ 255 ms 60
18 G.711 Jitter Buffer (max) 0 ~ 255 ms 120
19 G.723 Jitter Buffer( min) 0 ~ 300 ms 30
20 G.723 Jitter Buffer (average) 0 ~ 300 ms 60
21 G.723 Jitter Buffer (max) 0 ~ 300 ms 120
22 VAD Threshold 1~30(-19dB~+10dBandselfadjustment)
1=-19dB(-49dBm)
:
20=0dB(-30dBm)
:
29=9dB(-21dBm)
30 = 10 dB (- 20 dBm)
20
33 Priority CODEC setting
Priority of voice encoding method.
0~3
0 = G711_PT
1 = G723_PT
2 = G729_PT
3 = G722_PT
0
36 The Maximum FAX Transmission
Rate
1 = V.27ter, 4800 bps
3 = V.29, 9600 bps
5 = V.17, 14400 bps
5
41 FAX Communication no Communi-
cation Time-Out
10 ~ 32000 seconds 30
44 Low-speed Signal Data (FAX Proce-
dure Signal)
0~2 0
ISSUE 1.0SL1000/SL1100
Program
84
Program 84 : Hardware Setup for VoIPDB2-470