Program 26 : ARS Service & Least Cost
Routing
26-05 : LCR Carrier Table
Level
IN
Description
Use Program 26-05 : LCR Carrier Table to define the LCR Access Codes and routing options.
These options include Authorization codes and Cost Center
Input Data
Item No. Item Input Data Default
01 Delete Digits
Enter the quantity of leading digits that
need to be deleted
0-16 0
02 Access Code
Enter the Access Code and Option to
route to the Indirect Carrier
Maximum 16 digits
(0~9,
*
,#,P,@)
P = Pause
@ = Change to DTMF or wait for Con-
nect
No setting
03 Authorization Code Table
Enter the table number that contains the
correct Authorization code.
0~10
(0 = No Authorization code)
0
04 Cost Center Code
Optionally enter a cost center code.
0 = Not Used
1=Used
0
Conditions
The settings must comply with the requirements of the Indirect Carrier. The operation of the @ symbol
within the Access Code depend on the type of trunk. For analog trunk set as Dial Pulse the @ symbol
defines change to DTMF dialing. For ISDN trunks the @ symbol defines that a Connect Message is
received and then DTMF digits are sent in the B-Channel.
Feature Cross Reference
• LCR-Least Cost Routing
ISSUE 1.0 SL1000/SL1100
Program
26
Programming Manual 2-297
To Next Page
Loading...
