Program 10 : System Configuration Setup
10-46 : DR700 Server Information Setup
Level
IN
Description
Use Program 10-46 : DR700 Server Information Setup to set up the information of DR700 Server.
Input Data
Item No. Item Input Data Default Related Program
01 Register Mode
Normal:
When the phone boots up, it re-
ports the ext. assigned in the
phone or chooses the next avail-
able extension in the system.
Password is not required.
Auto:
If set to Auto, the SIP user name
and password must be entered on
the actual IP phone. These settings
must match 84-22/15-05-27, or the
phone does not come on-line.
Manual:
When the phone boots up, it
prompts user to enter a user ID
and password before logging in. It
checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come online.
0 = Normal
1 = Auto
2 = Manual
0
04 Server Name
Assign the Server name to be used
in the SIP URL.
Up to 32 characters sipphd
06 Register Port
Assign the port number in which
the SIP messages are sent to on
the VoIPDB.
This same port number must be
assigned in the SIP Multiline termi-
nals.
If this command is changed, it re-
quires a CPU reset.
0 ~ 65535 5080
07 Encryption Mode 0=Off
1=On
0
08 Encryption Type 0=Mode1 0
09 One Time Password Up to 10 characters (0 ~ 9,
*
, #) None 10-46-07
10 Start Port 1 ~ 128 (SL1000)
1 ~ 120 (SL1100)
1 10-46-01
11 Multicast IP Address
This sets the Multicast IP address
so that two or more main devices
don’t overlap on the same network,
or if Multicast is used by other IP
services.
224.0.0.0 ~ 239.255.255.255 224.0.0.10
12 Multicast Port 0 ~ 65535 30000
13 Subscribe Session Port 0 ~ 65535 5081
ISSUE 1.0SL1000/SL1100
Program
10
Program 10 : System Configuration Setup2-44
To Next Page
Loading...
