NEC SL1000 - Station Control

Program 90 : Maintenance Program
90-07 : Station Control
Level
SA
Description
Note: This program is available via telephone programming and WebPro not through PC Program-
ming.
Use Program 90-07 : Station Control for extension maintenance.
Input Data
Menu Number
1 = Hardware Reset
2 = Software Reset
Item No. Item Input Data
01 Extension Control Extension Number (up to four (SL1000) eight (SL1100) digits)
Conditions
None
Feature Cross Reference
None
ISSUE 1.0SL1000/SL1100
Program
90
Program 90 : Maintenance Program2-508