NEC SL1000 - Upnp Setup

Program 10 : System Configuration Setup
10-37 : UPnP Setup
Level
IN
Description
Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks.
Input Data
Item No. Item Input Data Default
01 UPnP Mode
Router must support UPnP.
0=Disable
1 = Enable
0
02 Retry Time
Set interval time to re-check the Router for
the WAN IP address.
When this set as 0 it will not retry.
0, 60 ~ 3600
(1 ~ 59 cannot be input)
60
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
10
Programming Manual 2-39