NEC SL1000 - Program 26: ARS Service & Least Cost Routing; Automatic Route Selection (ARS;F-Route) Service

Program 26 : ARS Service & Least Cost
Routing
26-01 : Automatic Route Selection (ARS/F-Route) Service
Level
IN
Description
Use Program 26-01 : Automatic Route Selection Service (ARS/F-Route) to define the system op-
tions for Automatic Route Selection (ARS/F-Route).
Input Data
Item
No.
Item Input Data Default
Related Pro-
gramming
Note
01 ARS Service
Enable or disable ARS.
0=Disable(Off)
1 = Enable (On)
0 26-02
26-03
26-04
02 Network Outgoing Inter-Digit ARS
Time
With Networking, this time replaces
20-03-04 when determining if all net-
work protocol digits have been re-
ceived. If ARS is enabled at Site B,
this time can be programmed for 5
(500 ms) at Site A. If ARS is disabled
and Site B is using F-Route for out-
bound dialing, this time should be
programmed for 30 (three seconds)
at Site A.
0 ~ 64800 seconds 30 seconds 20-03-04
03 ARS Misdialed Number Handling
If a user dials a number not pro-
grammed in ARS, this option deter-
mines if the system should route over
Trunk Group 1 or play error tone.
0 = Route to Trunk
Group 1
1 = Play Warning
Tone to Dialer
0 21-02
04 LCR Mode Option 0 = UK style
1 = Not UK style
0 26-02
26-05
26-06
26-07
26-08
26-09
06 Class of Service Match Access 0=Disable(Off)
1 = Enable (On)
0 26-02
07 F-Route Access COS Reference 0 = F-Route
1 = ARS
0 26-02
44-05
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
ISSUE 1.0 SL1000/SL1100
Program
26
Programming Manual 2-293