Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
Level
IN
Description
Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer to
the chart below for a description of each option, its range and default setting.
Input Data
Trunk Port Number
001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item
No.
Item Input Data Default
Related Program
Note
01 Trunk Name
Set the names for trunks. The
trunk name displays on a multi-
line terminal for incoming and
outgoing calls.
Up to 12 characters Refer below
02 Transmit Level
Use this option to select the
CODEC gain for the trunk. The
option sets the gain (signal am-
plification) for the trunk you are
programming.
1~63
(- 15.5 dB ~ + 15.5
dB in 0.5 dB inter-
vals)
32 (0 dB)
03 Receive Level
Use this option to select the
CODEC gain for the trunk. The
option sets the gain (signal am-
plification) for the trunk you are
programming.
1~63
(- 15.5 dB ~ + 15.5
dB in 0.5 dB inter-
vals)
32 (0 dB)
04 Transmit Gain Level for Con-
ference and Transfer Calls
Use this option to select the
CODEC gain type used by the
trunk when it is part of an Unsu-
pervised Conference.
1~63
(- 15.5 dB ~ + 15.5
dB in 0.5 dB inter-
vals)
32 (0 dB)
05 Receive Gain Level for Confer-
ence and Transfer Calls
Use this option to select the
CODEC gain type used by the
trunk when it is part of an Unsu-
pervised Conference.
1~63
(- 15.5 dB ~ + 15.5
dB in 0.5 dB inter-
vals)
16 (- 8 dB)
06 SMDR Printout
Use this option to have the sys-
tem include/exclude the trunk
you are programming from the
SMDR printout. Refer to Pro-
grams 35-01 and 35-02 for
SMDR printout options.
0=NoPrintOut
1 = Prints Out
1
07 Outgoing Calls
Use this option to allow/prevent
outgoing calls on the trunk you
are programming.
0 = Deny (No)
1 = Allow (Yes)
1
08 Toll Restriction
Use this option to enable/
disabled Toll Restriction for the
trunk. If enabled, the trunk fol-
lows Toll Restriction program-
ming (example: Programs 21-05,
21-06). If disabled, the trunk is a
toll free line.
0 = Restriction Dis-
abled (No)
1 = Restriction En-
abled (Yes)
1 21-04
21-05
21-06
ISSUE 1.0 SL1000/SL1100
Program
14
Programming Manual 2-97
To Next Page
Loading...
