NEC SL1000 - Program 35: SMDR Account Code Setup; SMDR Options

Program 35 : SMDR Account Code Setup
35-01 : SMDR Options
Level
IN
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options
for each of the eight SMDR ports. Refer to the following chart for a description of each option, its range
and default setting.
Input Data
SMDR Port Number 1 ~ 2
Item No. Item Input Data Default
01 Output Port Type
This option specifies the type of connection used for
SMDR. The baud rate for the COM port should be
set in Program 10-21-02 or 15-02-19.
0=None
1 = --Reserve--
2 = --Reserve--
3 = LAN
4 = --Reserve--
SMDR port1 :
3
SMDR port2 :
0
03 Header Language
Specify the language in which the SMDR header
should be printed.
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
0
04 Omit Digits
The number of digits entered in this option does not
print on the SMDR report. For example, if the entry
is 10, the first 10 digits a user dials do not appear on
the SMDR report.
0 ~ 24 (0 = Not applied) 0
05 Minimum Digits
Outgoing calls must be at least this number of digits
for inclusion in the SMDR report.
0 ~ 24 (0 = Not applied) 0
06 Minimum Call Duration
The duration of the call must be at least this time to
be included on the SMDR report.
0 ~ 65535 seconds (0 = All) 0
07 Minimum Ring Time (For Incoming Calls)
A call must ring for at least this time to be included
on the SMDR report.
0 ~ 65535 seconds (0 = All) 0
08 Format Selection 0 = Format1 Type (North America)
1 = Format2 Type (Overseas)
1
Conditions
None
Feature Cross Reference
• Station Message Detail Recording
ISSUE 1.0 SL1000/SL1100
Program
35
Programming Manual 2-343