NEC SL1000 - Virtual Loop Back Port Reset

Program 90 : Maintenance Program
90-39 : Virtual Loop Back Port Reset
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-39 : Virtual Loop Back Port Reset to reset to initial status.
Input Data
Item No. Item Input Data
01 Virtual Loop Back Reset [Reset?] : Dial 1 + press Hold
(Press Hold only to cancel.)
Conditions
None
Feature Cross Reference
• PC Programming
ISSUE 1.0 SL1000/SL1100
Program
90
Programming Manual 2-555