Table 1-4 Softkey Display Prompts
Softkey Display Prompts
If you press this Softkey
...
The system will ...
back
Go back one step in the program display.
You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a
list of programs.
Scroll down through the available programs.
Scroll up through the available programs.
select Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
- 1 Move back through the available program options.
+ 1 Move forward through the available program options.
SECTION 9 SYSTEM NUMBER PLAN/CAPACITIES
The following table provides the capacities for the SL1000/SL1100 system.
Table 1-5 System Number Plan/Capacities
System Number Plan/Capacities
Note
System Type Number Plan/Capacities
Related Pro-
gram
System
Analog Caller ID Detector (de-
tected by DSP)
132 (SL1000) 96 (SL1100) channels
Classes of Service 15 20–06
Day/Night Mode Numbers 8 12–07
Day/Night Service Patterns 4 12–07
Dial Tone Detector
DTMF Receiver
132 (SL1000)
96 (SL1100)
Toll Restriction Classes 15
Verifiable Account Code Table 800 35–06
Trunk
Trunk Port Number
126 (SL1000)
96 (SL1100)
Trunk Ports (Total) : 126 (SL1000)
• Analog Trunks 48 (SL1000)
• BRI Trunk Ports 36 (SL1000)
• T1/PRI Trunk Ports
(SL1000)
90 (SL1000)
• VoIPDB Trunk Ports
(VoIPDB & MEMDB is re-
quired. Need license to be
Max.)
16 (SL1000)
ISSUE 1.0 SL1000/SL1100
Programming Manual 1-7