To save a customer’s database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the CPU
and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the customer
data if necessary.) Note that a CF Card can only hold one customer database. Each database to be saved re-
quires a separate drive.
CF card
CF Slot (CN2)
CPU card
VMDB-C1
SECTION 5 USING KEYS TO MOVE AROUND IN THE
PROGRAMS
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and
move around in the menus.
Table 1-1 Keys for Entering Data (SL1000)
When you want to ... Telephone Programming
Enter Data into program 0~9,
*
,#,LineKey(1~6)
Next Index Cursor Key (Up)
Prior Index Cursor Key (Down)
Select Data Line Key (1 ~ 6)
All Clear Flash
Register Hold
Enter
Go Back to Prior Screen Mute
Clear / Back
Move Cursor Jump Up/Down DND or DND / CONF
Delete single character Clear / Back
Next Page -
Toggle between Number/Character Help
While in a Entering Number
Prior Page -
Quit the programming Speaker
Exit
Move Cursor to Left Cursor Key (Left)
Change Program Number -
Change Index Number
ISSUE 1.0SL1000/SL1100
Introduction1-4
To Next Page
Loading...
