NEC SL1000 - Automatic Trunk-To-Trunk Transfer Target Setup

Program 24 : Hold/Transfer Setup
24-04 : Automatic Trunk-to-Trunk Transfer Target Setup
Level
IN
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Speed Dialing
number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Input Data
Trunk Port Number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item
No.
Day/Night
Mode
Speed Dial
Area Number
Default Description
Related
Program
01 1 ~ 8 0 ~ 999 999 The destination telephone number of the
Trunk-to-Trunk Transfer uses the number reg-
istered into the Speed Dial. Use this program
to setup the Speed Dial Bin Number.
11-10-08
13-04
24-05
Conditions
None
Feature Cross Reference
• Call Forwarding, Off-Premise
ISSUE 1.0SL1000/SL1100
Program
24
Program 24 : Hold/Transfer Setup2-274