NEC SL1000 - Remote Conference Group Setup

Program 20 : System Option Setup
20-34 : Remote Conference Group Setup
Level
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Input Data
Remote Conference Group Number 1 ~ 4
Item No. Item Input Data Default
01 Conference Name
Enter the name displayed at the time of a Re-
mote Conference. This entry will display on
the keyset LCD.
Up to 12 characters Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
02 Password
Define the password of a Remote Confer-
ence.
4 digits Fixed
(0~9,@=wildcharacter)
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
03 Define the maximum number of participants
of a Remote Conference.
0~32 8
04 Max Conference Duration
Define the maximum duration of a Remote
Conference.
When this time passes, the conference is dis-
connected by the SL1000/SL1100.
0 ~ 64800 seconds 7200 seconds
05 End Tone Alert Time
Determine how long prior disconnecting a Re-
mote Conference call (based on the maxi-
mum conference duration above) the SL1000/
SL1100 should send out a beep. This is used
to warn the conference participants of the
pending disconnect.
0 ~ 64800 seconds 300 seconds
Conditions
None
Feature Cross Reference
• Conference, Remote
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-201