NEC SL1000 - Incoming Virtual Extension Ring Tone Order Setup

Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1 ~ 4)
for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an exten-
sion simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only flash.
There are 50 Virtual Extension ports.
Input Data
Extension Number Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Item No.
Priority
Order
Data Description
Related Pro-
gram
01 1 ~ 4 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring Tone
5 = Tone pattern 5 (SL1000)
6 = Tone pattern 6 (SL1000)
7 = Tone pattern 7 (SL1000)
When two or more virtual extensions
are set on a function key on the tele-
phone, and the tone pattern by which
the sound of each extension differs,
the priority of ring sound is set up.
15-08
Default
• By default, Virtual Extension ring tones have the following order :
Priority Order Ring Tone (Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
15
Programming Manual 2-141